Panasonic DMC-TZ30 Provozní pokyny

VQT4C04-1M0212KZ1042Operating Instructions for advanced featuresDigital CameraModel No. DMC-TZ30DMC-TZ31DMC-TZ27Before use, please read these instruc

- 10 -Names and Functions of Main Parts ●The illustrations and screens in this manual may differ from the actual product.Mode dial (→25)Use this to se

- 100 -Using the [Rec] menu ●Focus is fixed to (1-area-focusing) in the following cases: • [High Speed Video] scene mode • [Miniature Effect] in [Cr

- 101 -Using the [Rec] menu[Face Recog.] • For [Rec] menu setting procedures (→51)For details (→89).[Metering Mode] • For [Rec] menu setting procedure

- 102 -Using the [Rec] menu[Min. Shtr Speed] • For [Rec] menu setting procedures (→51)Sets shutter speed to minimum. We recommend using slower shutter

- 103 -Using the [Rec] menu[Burst] • For [Rec] menu setting procedures (→51)For details (→87).[Color Mode] • For [Rec] menu setting procedures (→51)Se

- 104 -Using the [Rec] menu[Red-Eye Removal] • For [Rec] menu setting procedures (→51)Automatically detects red-eye and corrects still picture data wh

- 105 -Using the [Rec] menu[Date Stamp] • For [Rec] menu setting procedures (→51)Still pictures can be taken with the recording date and time stamped

- 106 -Using the [Motion Picture] menu[Rec Mode] • For [Motion Picture] menu setting procedures (→51)Sets the data format of the motion picture that i

- 107 -Using the [Motion Picture] menu[Rec Quality] • For [Motion Picture] menu setting procedures (→51)Sets the picture quality of the motion picture

- 108 -Using the [Motion Picture] menu[Continuous AF] • For [Motion Picture] menu setting procedures (→51)Either allow the focus to be constantly adju

- 109 -Playing back still pictures recorded using the burst functionPictures taken with the or setting are recorded together as a group (burst gro

- 11 -Names and Functions of Main PartsCursor buttonWe recommend using the supplied hand strap to avoid dropping the camera.[EXPOSURE] button (→73)In

- 110 -Playing back still pictures recorded using the burst function ●[Playback] menu items cannot be used while the display appears within each burst

- 111 -Different playback methods [Playback Mode]Recorded pictures can be played back in a variety of ways. Press [MENU/SET] in playback modeThe menu

- 112 -Different playback methods [Playback Mode][Slide Show] • For switching [Playback Mode] (→111)Automatically play pictures in order and to music

- 113 -Different playback methods [Playback Mode] Operations during Slide ShowThe operation guide appears on the bottom right of the LCD monitor. •

- 114 -Different playback methods [Playback Mode][Filtering Play] • For switching [Playback Mode] (→111)You can refine the selection of pictures to b

- 115 -Retouching pictures[Auto Retouch]You can adjust the colour and brightness of a still picture to bring them into balance. • New pictures are cre

- 116 -Retouching pictures[Creative Retouch]You can retouch recorded still pictures by selecting the effect that you want to apply. • New pictures are

- 117 -Using the [Playback] menuYou can set the recorded picture to upload to the image-sharing websites, edit the picture (for example, trimming), an

- 118 -Using the [Playback] menu Uploading to image-sharing websitesWhen setting [Upload Set], the built-in uploading tool automatically makes copies

- 119 -Using the [Playback] menu[Text Stamp] • For [Playback] menu display and operation methods (→51).The recording date and time, location name info

- 12 -Names and Functions of Main PartsTouch operationsThis camera’s touch screen senses pressure that is applied to the screen.TouchTo “touch” is to

- 120 -Using the [Playback] menu Items that can be stamped [Shooting Date] [W/O TIME]: Stamp recording date [WITH TIME]: Stamp recording date and tim

- 121 -Using the [Playback] menu[Resize] • For [Playback] menu display and operation methods (→51).Picture size can be reduced to facilitate e-mail at

- 122 -Using the [Playback] menu[Cropping] • For [Playback] menu display and operation methods (→51).Enlarge your still pictures and crop unwanted are

- 123 -Using the [Playback] menu[Favorite] • For [Playback] menu display and operation methods (→51).By labelling your favourite pictures with a star

- 124 -Using the [Playback] menu[Print Set] • For [Playback] menu display and operation methods (→51).Picture/picture no./date printing settings can b

- 125 -Using the [Playback] menu[Protect] • For [Playback] menu display and operation methods (→51).Set protection to disable picture deletion. Preven

- 126 -Using the [Playback] menu[Face Rec Edit] • For [Playback] menu display and operation methods (→51).Edit or delete the recognition information f

- 127 -Using the [Playback] menu[Copy] • For [Playback] menu display and operation methods (→51).You can copy pictures between built-in memory and mem

- 128 -Using the GPS function to record the location of a pictureDMC-TZ30 DMC-TZ31GPS and map functions Before using the GPS function, read “About G

- 129 -Using the GPS function to record the location of a pictureDMC-TZ30 DMC-TZ31Using the GPS function to execute positioningWhen [GPS Setting] is [

- 13 -Charging battery • Always use the dedicated AC adaptor (supplied), USB connection cable (supplied), and battery for this camera.Always charge be

- 130 -Using the GPS function to record the location of a pictureDMC-TZ30 DMC-TZ31 Displaying the status and result of positioningThe icons that indi

- 131 -Using the GPS function to record the location of a pictureDMC-TZ30 DMC-TZ31 Information to be recorded on the picturesWhen the camera successf

- 132 -Using the GPS function to record the location of a pictureDMC-TZ30 DMC-TZ31Executing the positioning function right away to update the current

- 133 -Using the GPS function to record the location of a pictureDMC-TZ30 DMC-TZ31 Interval between positioning operationsEven if the positioning inf

- 134 -Using the GPS function to record the location of a pictureDMC-TZ30 DMC-TZ31Changing place name information to be displayedYou can change the re

- 135 -Using the GPS function to record the location of a pictureDMC-TZ30 DMC-TZ31Disabling the positioning function when the camera is turned off Whe

- 136 -Changing the place name information to be recordedDMC-TZ30 DMC-TZ31When there are other candidate locations as a result of positioning, you can

- 137 -Changing the recorded GPS informationDMC-TZ30 DMC-TZ31[Edit Location]You can edit the location information (latitude and longitude) recorded on

- 138 -Changing the recorded GPS informationDMC-TZ30 DMC-TZ31 Using the location information of another picture for reference Use cursor button to s

- 139 -Changing the recorded GPS informationDMC-TZ30 DMC-TZ31 Selecting a place name from candidates Use cursor button to select [Candidate] and pres

- 14 -Charging batteryInserting the batteryTo charge the battery, insert it into the camera. • Set the camera ON/OFF switch to OFFSlide to the release

- 140 -Adjusting the time using GPSDMC-TZ30 DMC-TZ31You can automatically update the [Clock Set] of the camera using the date and time information con

- 141 -Reducing the time required for positioningDMC-TZ30 DMC-TZ31You can reduce the time required for positioning by copying in advance the predicted

- 142 -Reducing the time required for positioningDMC-TZ30 DMC-TZ31Using the “GPS Assist Tool” Using “GPS Assist Tool” by connecting the camera and co

- 143 -Reducing the time required for positioningDMC-TZ30 DMC-TZ31 Using a card reader/writer (commercially available)Preparation: • Turn on the com

- 144 -Reducing the time required for positioningDMC-TZ30 DMC-TZ31Updating the GPS assist dataStart up the “GPS Assist Tool” on the computer Windows

- 145 -Reducing the time required for positioningDMC-TZ30 DMC-TZ31Checking the expiration date of the GPS assist dataThe GPS assist data expires in 30

- 146 -Using the map functionDMC-TZ30 DMC-TZ31You can display a map showing the location where a picture was taken or your current location. ●If you c

- 147 -Using the map functionDMC-TZ30 DMC-TZ31Displaying your current location on a mapWhen positioning is executed successfully using GPS, you can di

- 148 -Using the map functionDMC-TZ30 DMC-TZ31Displaying only pictures taken in the same areaYou can select the area of a picture on a map to narrow d

- 149 -Using the map functionDMC-TZ30 DMC-TZ31Displaying a map by selecting a country or regionYou can select a place name that you want to display an

- 15 -Charging batteryCharging the batteryWe recommend charging in a location where the ambient temperature is between 10 °C and 30 °C (50 °F to 86 °F

- 150 -Using the map data on the DVD (supplied)DMC-TZ30 DMC-TZ31You can use “LUMIX Map Tool” to copy the map data on the DVD (supplied) to a memory ca

- 151 -Using the map data on the DVD (supplied)DMC-TZ30 DMC-TZ31Copying the map data to a memory cardPreparation: • Install “LUMIX Map Tool” on your

- 152 -Using the map data on the DVD (supplied)DMC-TZ30 DMC-TZ31 Copying map data directly to a memory card in the camera from the computer instead o

- 153 -Registering my landmarkDMC-TZ30 DMC-TZ31You can register a user-defined location that is not registered in this camera as my landmark in order

- 154 -Registering my landmarkDMC-TZ30 DMC-TZ31Registering the recording location as my landmarkYou can use the location information of a picture to r

- 155 -Registering my landmarkDMC-TZ30 DMC-TZ31Selecting My landmark and displaying it on a mapYou can display a map by moving the registered My landm

- 156 -Viewing on TV screenConnecting with other devicesYou can view pictures on a TV screen by connecting your camera to your TV with the HDMI mini c

- 157 -Viewing on TV screen To connect with an HDMI mini cable (optional) ●Always use a genuine Panasonic HDMI mini cable (optional). ●Some of the pl

- 158 -Viewing on TV screenVIERA Link (HDMI) (HDAVI Control™)What is VIERA Link (HDMI)? ●VIERA Link is a function that automatically links this camera

- 159 -Viewing on TV screenPreparation: Set [VIERA Link] to [ON] (→59).Connect the camera to a VIERA Link (HDMI)-compatible Panasonic television (VIER

- 16 -Charging battery Charging lamp indicationsOn: Charging in progressOff: Charging stops (After charging stops, disconnect the camera from the el

- 160 -Viewing on TV screenViewing 3D still picturesIf you connect this camera to a 3D-capable TV, and play back still pictures that you recorded in 3

- 161 -Viewing on TV screen ●On the LCD monitor of this camera, 3D still pictures will be played back in 2D (conventional pictures). ●If you switch be

- 162 -Keep the recorded still pictures and motion picturesThe methods for copying still and motion pictures recorded with this camera to other device

- 163 -Keep the recorded still pictures and motion picturesUse “PHOTOfunSTUDIO” to copy to your computer Using the “PHOTOfunSTUDIO” software on the su

- 164 -Using with your PCStill/motion pictures can be copied from the camera to your computer by connecting the two together. • Some computers can rea

- 165 -Using with your PCConnect camera to computer • Please make sure you use the supplied USB connection cable.Use of cables other than the supplied

- 166 -Using with your PC∗1 New folders are created in the following cases: • When pictures are taken to folders containing files numbered 999. • When

- 167 -Using with your PCUploading pictures to image-sharing websitesUsing the uploading tool ([LUMIX Image Uploader]), you can upload still pictures

- 168 -PrintingPreparation: • Charge the battery sufficiently. • When printing pictures from the built-in memory, remove any memory cards. • Adjust th

- 169 -Printing ●Do not use any other USB connection cables except the supplied one. ●Disconnect USB connection cable after printing. ●Turn off power

- 17 -Charging batteryGuidelines for number of recordable pictures and operating timeThe number of recordable pictures or available operating time may

- 170 -PrintingPrinting multiple picturesUse cursor button to select [Multi Print] in step (→168)Use cursor button to select item and press [MENU/SE

- 171 -PrintingMaking print settings on the cameraSetting options include the number of printed pictures and their size. Make settings before selectin

- 172 -List of LCD monitor displaysScreens shown here are only examples. The actual display may vary. • Press the [DISP.] button to change display. I

- 173 -List of LCD monitor displays∗1 XXmXXs, RXXmXXs[m] and [s] indicate “minute” and “second”.∗2 • The displaying is performed in the following pr

- 174 -List of LCD monitor displaysScreens shown here are only examples. The actual display may vary. • Press the [DISP.] button to change display. I

- 175 -List of LCD monitor displaysScreens shown here are only examples. The actual display may vary. • Press the [DISP.] button to change display. I

- 176 -Message displaysMeanings of and required responses to major messages displayed on LCD monitor.[This memory card cannot be used] ●A MultiMediaCa

- 177 -Message displays[Memory card parameter error] ●Card is not of SD standard. ●When cards in capacities of 4 GB or more are used, only SDHC or SDX

- 178 -Q&A TroubleshootingTry checking these items (→178 - 185) first.If the problem persists, performing [Reset] in the [Setup] menu may resolve

- 179 -Q&A TroubleshootingGPS (continued) DMC-TZ30 DMC-TZ31Positioning takes time. ●When using the camera for the first time or after not using i

- 18 -Charging battery Recording motion pictures[Rec Mode][AVCHD] [MP4][Rec Quality][GPH]∗1[PSH][GFS]∗1[FSH][FHD]Available recording time∗2Approx. 55

- 180 -Q&A TroubleshootingRecording (continued)Some pictures are taken when I press the shutter button just once. ●Camera is set to use [Auto Bra

- 181 -Q&A TroubleshootingRecording (continued)Panorama picture recording stops before finishing. ●If the pan motion of the camera is too slow, t

- 182 -Q&A TroubleshootingPlaybackPictures have been rotated. ●[Rotate Disp.] is activated (→60)Cannot view pictures. There are no recorded pictu

- 183 -Q&A TroubleshootingTV, computer, printerNo image appears on TV. Image blurred or not coloured. ●Not connected correctly (→156). ●The telev

- 184 -Q&A TroubleshootingTV, computer, printer (continued)Cannot print when connecting to printer. ●Printer not compatible with PictBridge. ●Set

- 185 -Q&A TroubleshootingOthersMenu not displayed in desired language. ●Change [Language] setting (→61).Camera rattles if shaken. ●This sound is

- 186 -Usage cautions and notesWhen in use ●Camera may become warm if used for long periods of time, but this is not a fault. ●Keep this unit as far a

- 187 -Usage cautions and notesWhen not using for a while ●Turn off camera power before removing battery and card (ensure that battery is removed to p

- 188 -Usage cautions and notesAbout charging the battery ●The time required for charging varies depending on conditions of battery usage. Charging ta

- 189 -Usage cautions and notesAbout 3D viewing ●Anyone who is hypersensitive to light, suffers from heart disease or is otherwise unwell should avoid

- 19 -Inserting and removing the card (optional) ●Keep the Memory Card out of reach of children to prevent swallowing. ●To remove the card, turn the c

- 190 -Usage cautions and notesDMC-TZ30 DMC-TZ31Important! Be sure to read the following before using the location names that are stored in this produ

- 191 -Usage cautions and notesDMC-TZ30 DMC-TZ31No Warranty.This Data is provided to you “as is,” and you agree to use it at your own risk. Panasonic

- 192 -Usage cautions and notesDMC-TZ30 DMC-TZ31Export Control.Panasonic Corporation shall not export from anywhere any part of the Data or any direct

- 193 -Usage cautions and notesDMC-TZ30 DMC-TZ31Notices related to licensed software copyright holders© 2011 NAVTEQ. All rights reserved.“MAPPLE” is a

- 194 -Usage cautions and notesDMC-TZ30 DMC-TZ31Territory NoticeAustralia © Hema Maps Pty. Ltd, 2011.Copyright. Based on data provided under license f

- 195 -Usage cautions and notesDMC-TZ30 DMC-TZ31Territory NoticeSri Lanka This product incorporates original source digital data obtained from the Sur

- 196 -Usage cautions and notesDMC-TZ30 DMC-TZ31 Landmark typesAlthough approx. 1,000,000 landmarks are registered in the built-in memory, there are

• HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States an

- 2 -ContentsBefore useBefore use ... 6About GPS DMC-TZ30 DMC-TZ31 ...8Standard Accessories ...

- 20 -Picture save destination (cards and built-in memory)Pictures will be saved to a card if one is inserted, or to the built-in memory if not. B

- 21 -Picture save destination (cards and built-in memory) Displaying the picture recording capacityEstimated remaining pictures or recording time cap

- 22 -Picture save destination (cards and built-in memory) Recording capacity guidelines (pictures/recording time)The number of pictures you can take

- 23 -Setting the clockTurn on the powerThe power is turned on.If the language select screen is not displayed, proceed to step .Press [MENU/SET] whil

- 24 -Setting the clockPress to select [Yes] and press [MENU/SET] if automatically correcting time of day using the GPS function • To manually set d

- 25 -BasicsSequence of operations1Turn on the power2Set to 3Set to the desired recording modeAlign the mode dial correctly to the mode that you want

- 26 -Sequence of operations4Aim the camera and shoot Taking still pictures Press the shutter button halfway to focus Press and hold the shutter but

- 27 -Taking pictures with your own settings [Program AE] ModeRecording mode: ●If a warning is displayed about jitter, use [Stabi

- 28 -When [AF Mode] is set to (1-area-focusing), focus on the AF area in the centre of the picture. If a subject you want to record is not in the c

- 29 -Touching the screen and recording (Touch Shutter function)This function enables you to focus and record still pictures simply by touching the

- 3 -ContentsUsing the [Setup] menu ... 54[Clock Set] ...54[Auto Clock Set] DMC-TZ

- 30 -Touching the screen and adjusting the focus and exposure (Touch AF/AE function)This function enables the focus and exposure to be set when you

- 31 -Taking pictures with automatic settings [Intelligent Auto] ModeRecording mode: Set to ([Intelligent Auto] Mode)Take a pict

- 32 -Taking pictures with automatic settings [Intelligent Auto] Mode Automatic Scene DetectionCamera reads scene when pointed at subject, and makes

- 33 -Taking pictures with automatic settings [Intelligent Auto] Mode [Motion Deblur]The camera automatically sets the optimum shutter speed in accor

- 34 -Taking pictures with automatic settings [Intelligent Auto] Mode [iHDR] (intelligent High Dynamic Range)When [iHDR] is set to [ON] and there is,

- 35 -Taking pictures with automatic settings [Intelligent Auto] Mode AF TrackingThis function enables the camera to continue to focus on the subject

- 36 -Taking pictures with automatic settings [Intelligent Auto] Mode [Intelligent Auto] Mode restrictionsOnly the menu items which are displayed in

- 37 -Taking motion picturesRecording mode: Press the motion picture button to start recording[Rec Mode] (→106)/[Rec Quality] (→107)

- 38 -Taking motion pictures About the recording format for recording motion picturesThis unit can record motion pictures in either AVCHD or MP4 form

- 39 -Taking motion pictures Recording motion pictures in Records a motion picture at your preferred settings. • Aperture and shutter speed are autom

- 4 -ContentsRegister your own settings and record [Custom] Mode ... 85[Cust.Set Mem.] ...

- 40 -Taking motion pictures ●If the surrounding temperature is high, or a motion picture is recorded continuously, is displayed and recording may b

- 41 -Taking motion picturesRecording still pictures while a motion picture is being recordedStill pictures can be recorded even while a motion pictur

- 42 -Viewing your pictures [Normal Play] ●It may not be possible to view pictures on this camera that were previously edited on a computer. ●If the

- 43 -Viewing your pictures [Normal Play]Zooming in and viewing “Playback Zoom”Touch the area that you want to magnifyEach time you touch an area, th

- 44 -Viewing your pictures [Normal Play]Viewing pictures by their recording date “Calendar Playback”Move the zoom lever toward W side several timesT

- 45 -Viewing motion picturesThis unit was designed to play motion pictures using the AVCHD, MP4 and QuickTime Motion JPEG formats. • Slide the REC/PL

- 46 -Viewing motion pictures ●You can also use the cursor button to perform playback operations.: Pause/play: Stop: Fast rewind (2 steps)/Single-fra

- 47 -Viewing motion picturesCapturing still pictures from motion picturesSave a scene from a motion picture as a still picture.Display the picture th

- 48 -Viewing motion pictures[Video Divide]A single motion picture can be split into 2 parts. This is convenient when you want to keep just the necess

- 49 -Deleting pictures ●Do not turn off the power during deletion. ●Use a sufficiently charged battery. ●Pictures cannot be deleted in the following

- 5 -ContentsGPS and map functions DMC-TZ30 DMC-TZ31Using the GPS function to record the location of a picture ... 128Using the

- 50 -Deleting picturesPress to delete displayed pictureUse to select [Delete Multi]/[Delete All] and press [MENU/SET] ●[Delete Multi]Use cursor b

- 51 -Setting the menuPress [MENU/SET]The menu selection screen is displayed.Use cursor button to select a menu, and then press [MENU/SET] • The menu

- 52 -Setting the menuMenu type[Rec] menu (→95)(Recording mode only) • You can perform settings such as tones, Sensitivity, Aspect Ratio, and Picture

- 53 -Setting the menuUsing Quick menuDuring recording, you can easily call some of the menu items and set them.Press [Q.MENU] buttonPress to sele

- 54 -Using the [Setup] menuItem Settings, notes[Clock Set](→23)Set time, date, and display format.DMC-TZ30 DMC-TZ31[Auto Clock Set]Setting the clock

- 55 -Using the [Setup] menuItem Settings, notes[Volume]Adjust volume of sound from speakers (7 levels).[0] / [1] / [2] / [3] / [4] / [5] / [6] • Cann

- 56 -Using the [Setup] menuItem Settings, notes[Guide Line]Select recording information display and types of guidelines.[Rec. Info.][ON] (Display rec

- 57 -Using the [Setup] menuItem Settings, notes[Economy]Turn off the power or make the LCD monitor go dark while not using the camera to minimise bat

- 58 -Using the [Setup] menuItem Settings, notes[No.Reset]Reset picture file numbers. • The folder number is updated and the file number starts from

- 59 -Using the [Setup] menuItem Settings, notes[Output]Change the settings to be used when the camera is connected to a TV or other device.[Video Out

- 6 -Before useBefore use Camera handlingKeep the camera away from excessive vibration, force, or pressure. ●Avoid using the camera under the followi

- 60 -Using the [Setup] menuItem Settings, notes[Rotate Disp.]Automatically rotate portrait still pictures.: Rotate and display pictures displayed on

- 61 -Using the [Setup] menuItem Settings, notes[Language]Change display language.Set the language displayed on the screen.[Demo Mode]View demonstrati

- 62 -Changing recording information displayApplication (Record)Change between different LCD monitor displays, such as Histograms.Press [DISP.] button

- 63 -Using ZoomRecording mode: ●Adjust the focus after adjusting the zoom. ●Do not touch the lens barrel during zooming. ●The zoom

- 64 -Using ZoomUsing the zoom by performing touch operationsTouch The zoom bar appears on the screen.Touch the T or W edge of the zoom bar on the scr

- 65 -Using ZoomZoom types and useThe zoom ratio changes when the number of recording pixels is changed. Optical ZoomZooming in up to 20x is possible

- 66 -Taking pictures with flashRecording mode: Press to display [Flash]Use cursor button to select the desired type and press [M

- 67 -Taking pictures with flash Available types in each mode (○: Available, –: Not available, : Default setting)[Scene Mode] ○∗1○ ○ ○ ○ ○–○ ○ ○ ○

- 68 -Taking close-up picturesRecording mode: When you want to enlarge the subject, setting to [AF Macro] ( ) enables you to take pi

- 69 -Taking close-up pictures[Macro Zoom]To take even larger images of the subject, setting to [Macro Zoom] enables the subject to appear even larger

- 7 -Before use Always take a test shot firstBefore important events when you will use the camera (at weddings, for example), always take a test shot

- 70 -Taking pictures with self-timerRecording mode: We recommend using a tripod. This is also effective for correcting jitter when

- 71 -Corrects the exposure when there is a backlight or when the subject is too dark or too bright. Recording mode: Press to dis

- 72 -Taking pictures with Exposure CompensationRecording while exposure is changed automatically ([Auto Bracket])Records 3 pictures in continuous suc

- 73 -Determine aperture and shutter speed and record Recording mode: [Aperture-Priority] ModeWhen recording, you can control the ap

- 74 -Determine aperture and shutter speed and record [Manual Exposure] ModeThis mode of recording lets you set any aperture value and shutter speed w

- 75 -Taking Pictures with different picture effects [Creative Control] modeRecording mode: You can select your own settings from

- 76 -Taking Pictures with different picture effects [Creative Control] mode ●A setting that was selected in [Creative Control] mode is retained eve

- 77 -Taking pictures according to the scene [Scene Mode]Recording mode: Using [Scene Mode] enables you to take pictures with opti

- 78 -Taking pictures according to the scene [Scene Mode] • How to select a scene (→77) • Using flash in Scene Modes (→66)[Portrait]Improves the ski

- 79 -Taking pictures according to the scene [Scene Mode] • How to select a scene (→77) • Using flash in Scene Modes (→66)[Panorama Shot](Continued)

- 8 -Before useAbout GPS DMC-TZ30 DMC-TZ31 About the camera’s location name informationBefore using the camera, be sure to read “Licence Agreement fo

- 80 -Taking pictures according to the scene [Scene Mode] • How to select a scene (→77) • Using flash in Scene Modes (→66) [Sports]Takes pictures of

- 81 -Taking pictures according to the scene [Scene Mode] • How to select a scene (→77) • Using flash in Scene Modes (→66) [HDR]The camera can combi

- 82 -Taking pictures according to the scene [Scene Mode] • How to select a scene (→77) • Using flash in Scene Modes (→66) [Sunset]Takes clear pictu

- 83 -Taking pictures according to the scene [Scene Mode] • How to select a scene (→77) • Using flash in Scene Modes (→66) [High Speed Video]Records

- 84 -Taking 3D pictures [3D Photo Mode]Recording mode: Pictures are recorded continuously while moving the camera horizontally, an

- 85 -Registering your preferred recording mode, [Rec] menu settings, etc. to [Cust.Set Mem.] and setting the mode dial to / allows you to switch

- 86 -Register your own settings and record [Custom] Mode [Custom]Settings registered in [Cust.Set Mem.] can be quickly called up by setting the mode

- 87 -Burst functionRecording mode: A burst of still pictures can be recorded while the shutter button is pressed fully.Select [Burs

- 88 -Burst function Note on the picture size setting[Aspect Ratio]4:3 5 M, 3 M, 0.3 M 2.5 M, 0.3 M 3 M3:2 4.5 M, 2.5 M, 0.3 M 3 M, 0.3 M 2.5 M16:9 3

- 89 -Recording with the Face Recognition function [Face Recog.]Recording mode: How the Face Recognition function works During r

- 9 -Standard AccessoriesCheck that all the accessories are supplied before using the camera. ●The accessories and their shape will differ depending o

- 90 -Recording with the Face Recognition function [Face Recog.] Registering face pictures Up to 6 people’s face pictures can be registered along wit

- 91 -Recording with the Face Recognition function [Face Recog.] Editing or deleting information about registered persons Information about registere

- 92 -Useful features for travel[Travel Date] • For [Setup] menu setting procedures (→51) If you set your travel schedule and record pictures, the day

- 93 -Useful features for travel[World Time] • For [Setup] menu setting procedures (→51)Set the recording date and time with the local time at your d

- 94 -Entering TextUse the cursor button to enter names with the Face Recognition function and in Scene Modes [Baby] and [Pet], or to register locatio

- 95 -Using the [Rec] menu[Aspect Ratio] • For [Rec] menu setting procedures (→51)Set the aspect ratio of still pictures. Recording mode:

- 96 -Using the [Rec] menu[Quality] • For [Rec] menu setting procedures (→51)Set quality of picture. Recording mode: Settings:

- 97 -Using the [Rec] menu[White Balance] • For [Rec] menu setting procedures (→51)Adjust colouring to suit light source if colours otherwise appear u

- 98 -Using the [Rec] menu Setting White Balance manually ( ) Select and press [MENU/SET] Point the camera towards a white object (e.g. paper) an

- 99 -Using the [Rec] menu[AF Mode] • For [Rec] menu setting procedures (→51)Method of aligning focus can be changed according to position and number