Panasonic KXMB1530FX Provozní pokyny

Operating InstructionsMulti-Function PrinterThe pictured model is KX-MB1500.Model No. KX-MB1500HXKX-MB1520EX KX-MB1520FXKX-MB1530EXKX-MB1530FXR Do NOT

1.5 Toner cartridgeThe supplied toner cartridge is a starter toner cartridge.Caution:R Read the following instructions before you begininstallation. A

5 Hold the toner cartridge (A) by the centre handle,then insert firmly to lock into place.A6 Close the front cover.When to replace the toner cartridge

Power cordR Connect to a power outlet(220-240 V, 50/60 Hz).Telephone line cord*1R Connect to a single telephone line jack.[EXT] jack*1R You can connec

1.8 Recording paperNote for recording paper:R We recommend that you test paper (especiallyspecial sizes and types of paper) on the unit beforepurchasi

3 Load the paper, print-side down (A).Important:R Push down to lock the plate (B) in the paperinput tray, if necessary.AB4 Adjust the recording paper

R After use, pull up the paper exit, and then replace thetab (A) to the original position.ACaution for the paper input trayR Do not drop the paper inp

Therefore, if you print with the cover closed, thepaper may jam inside the unit.161. Introduction and Installation

2.1 Dialling mode (KX-MB1520/KX-MB1530 only)If you cannot dial (page 38), change this settingaccording to your telephone line service.MMenuNMSetN1 MMe

2.3 Setting the original2.3.1 Using the scanner glassAB1 Open the document cover (A).2 Place the document FACE DOWN on the scannerglass (B), aligning

document feeder. To return the document to it’soriginal order you can feed it through the documentfeeder a second time, see page 65.R Confirm that the

Thank you for purchasing a Panasonic product.You can select the Czech, Hungarian, Slovak orEnglish language (KX-MB1500HX/KX-MB1520EX/KX-MB1530EX only)

2.4 Adjusting the volume(KX-MB1520/KX-MB1530 only)Important:R Before adjusting the volume, set the operationmode to fax mode. If the MFaxN light is OF

R If the time has not previously been set, Caller ID willnot adjust the clock.2.6 Your logo (KX-MB1520/KX-MB1530 only)You can program your logo (name,

2.7 Your fax number (KX-MB1520/KX-MB1530 only)You can program your fax number so that it appears onthe top of each page sent.MSetNMFlashN MFNMENMMenuN

2.8.2 Installing Multi-Function Station on acomputerR Install Multi-Function Station (CD-ROM) beforeconnecting the unit to a computer with the USBcabl

2. [Modify] A [Add Multi-Function Station Driver].Then follow the on-screen instructions.Note:R You cannot connect more than one unit to the samecompu

[ ]R To display usage tips.[]R To display information about Multi-Function Station.Note:R You can confirm if the unit is connected to yourcomputer by

3.1 Printing from WindowsapplicationsYou can print a file created in a Windows application. Forexample, to print from WordPad, proceed as follows:1 Op

– Labels that do not completely cover the backingsheet as follows:3.2 Easy Print UtilityBy printing using the Panasonic Easy Print Utility insteadof t

4.1 Scanning from the unit (PushScan)You can easily scan the document by using the operationpanel on the unit. You can select one of the followingscan

4.2 Scanning from a computer(Pull Scan)Note:R When scanning a document, we recommend usingthe scanner glass rather than the automaticdocument feeder f

For your safetyLaser radiationCLASS 1 LASER PRODUCTR The printer of this unit utilises a laser. Use of controlsor adjustments or performance of proced

The [Select...] button will not be displayed whenthere is only one printer driver installed.304. Scanner

5.1 Making a copy5.1.1 Using the scanner glassMSetNMCNMDNMENMStopNMStartNMCopy SizeNMQualityNMFax Auto AnswerNMCopyN* The pictured model is KX-MB1520.

5.1.2 Using the automatic document feeder(KX-MB1530 only)MCopyNMStopNMStartN1 If the MCopyN light is OFF, turn it ON by pressingMCopyN repeatedly.2 Se

Example: 150 % enlarged copyUsing the scanner glass (A):Original document Enlarged copyAUsing the automatic document feeder (KX-MB1530only):Original d

R The scanning area changes according to theselected setting in step 4. See the following tablefor details. The shaded area will be scanned.2 Press MP

Original document Page layout“8 in 1”5.2.4 Poster feature (Scanner glass only)You can make copies divided into 2 (“1 X 2”), 4 (“2 X2”) or 9 (“3 X 3”)

Original document Page layout“8 in 1” “PORTRAIT”“LANDSCAPE”Note:R You can save the previous page layout setting(feature #467 on page 60).Separate N in

– while the unit is printing received fax documents(KX-MB1520/KX-MB1530 only).1 Set the original (page 18).2 While “PC PRINTING” or “PRINTING”(KX-MB15

6.1 Sending a fax manually6.1.1 Using the scanner glassBy using the scanner glass, you can send a page frombooklets or small size paper.MSetNMCNMDNMSt

Printing a sending reportA sending report provides you with a printed record oftransmission results. To print the sending reports, makesure that featu

R The unit should not be exposed to direct sunlight.R Do not place heavy objects on top of the unit. Whenyou leave the unit unused for a long period o

6.3 Sending a fax usingphonebookBefore using this feature, store the desired names andtelephone numbers into the phonebook (page 39).R Make sure that

– [Do not enter a fax number directly]: You canonly select fax numbers stored in the phonebook.– [Re-enter to confirm the fax number]: Whenentering th

R The MFax Auto AnswerN light turns OFF.Fax Auto AnswerNote:R Make sure feature #404 is set to “TEL” beforehand(page 56).How to receive phone calls an

6.6 Receiving a fax automatically :Auto answer ONR A4 or letter size recording paper can be used.6.6.1 Activating FAX ONLY modePress MFax Auto AnswerN

press MGN MBN M9N (default fax activation code)firmly.3. Replace the handset.Note:R To stop receiving, see page 65.R To receive fax documents using th

R The number of rings is determined by the “Silentfax recognition ring count” (feature #436 onpage 58).R Callers will hear a ring back tone different

– the fax activation code (feature #434 onpage 58)Note:R If the call is a phone call, the answering machine willrecord voice messages.If a fax calling

2. Press MEN repeatedly to display “JUNK LISTDISP.”. A MSetN3. Press MCN or MDN repeatedly to display the desireditem. A MFNR To cancel erasing, press

7.1 Caller ID serviceThis unit is compatible with the Caller ID serviceoffered by your local telephone company. To use thisunit’s Caller ID features,

To correct a mistake1. Press MFN or MEN to move the cursor to the incorrectnumber.2. Press MStopN to delete the number.3. Enter the correct number.To

1. Introduction and InstallationAccessories1.1 Supplied accessories ...71.2 Accessory information ...

8.1 ProgrammingMSetNMMenuN1 MMenuN2 Press MBN and the 3-digit code (page 51 topage 62).3 Press the appropriate selection to display the desiredsetting

8.2 Basic featuresFeature/Code SelectionSetting the date and timeMBNM1NM0NM1N(KX-MB1520/KX-MB1530only)Enter the date and time using the dial keypad. S

Feature/Code SelectionSetting the ADSL modeMBNM1NM2NM4N(KX-MB1520/KX-MB1530only)When you use a DSL/ADSL line, this feature improves the reliability by

Feature/Code SelectionSetting the beep sounds andkeytonesMBNM1NM6NM5NM0N “OFF”: Deactivates this feature.M1N “ON” (default): You will hear confirmatio

Feature/Code SelectionSetting the recording papersize in the paper input trayMBNM3NM8NM0NM1N “LETTER”: Letter-size paperM2N “A4” (default): A4-size pa

Feature/Code SelectionSetting the default operationmode timerMBNM4NM6NM4N(KX-MB1520/KX-MB1530only)To set the timer before returning to the default ope

8.3 Fax features (KX-MB1520/KX-MB1530 only)Feature/Code SelectionChanging the TEL/FAXdelayed ring countMBNM2NM1NM2NIf you use an extension telephone i

Feature/Code SelectionSending a fax at a specifictimeMBNM4NM1NM2NThis feature allows you to take advantage of low-cost calling hours offered byyour te

Feature/Code SelectionConfirming the destinationbefore sending a faxMBNM4NM2NM0NM0N “OFF” (default): Deactivates this feature.M1N “ON”: You can send a

Feature/Code SelectionSetting the memory receptionalertMBNM4NM3NM7NTo alert you with a beeping sound when a received fax document is stored intomemory

11. Paper JamsJams11.1 Recording paper jam ...7511.2 Document jams (Automatic document feeder)(KX-MB1530 only) ...

8.4 Copy featuresFeature/Code SelectionSetting the input tray to usefor copyMBNM4NM6NM0NM1N “#1” (default): The paper input tray is selected. The disp

8.5 PC print featuresFeature/Code SelectionChanging the data timeoutsettingMBNM7NM7NM4NThe unit will automatically print the remaining data in memory

8.6 Scan featuresFeature/Code SelectionSetting the scan mode forPush ScanMBNM4NM9NM3NM1N “VIEWER” (default): The scanned image will be displayed in th

9.1 Character entry (KX-MB1520/KX-MB1530 only)The dial keypad is used to enter characters andnumbers.– Press MFN or MEN to move the cursor.– Press the

9.2 Status of the unit9.2.1 Using Remote ControlYou can easily operate the following functions from yourcomputer.– Programming the features (page 51)K

9.3 Cancelling the operationsYou can cancel the current operation from the unit. Youcan also select the desired operation to cancel.1 MStopNR “USER ST

10.1 Report messages (KX-MB1520/KX-MB1530 only)To indicate the unit’s fax transmission/reception status, one of the following messages will be printed

10.2 Display messagesTo indicate the unit’s status, one or more of the following messages will appear on the display.Display Cause & Solution“CALL

Display Cause & Solution“LOW TEMP.” R The inside of the unit is extremely cold and cannot be operated. Use the unitin a warmer area.“MEMORY FULL”

10.3 When a function does not work10.3.1 GeneralProblem Cause & SolutionThe unit does not work. R Check the connections (page 11, 23).The recordin

1.1 Supplied accessoriesA Toner cartridge(starter)*1B CD-ROMC Importantinformation guideD Quick installationguideE Power cord F Telephone linecord*2*1

Problem Cause & SolutionI forgot the password forfeature programming viaremote operation.R You may have changed the feature programming password.

Problem Cause & SolutionWhen using the unit as aprinter, the printing result isdistorted.R When your unit is connected to the computer by USB, if

10.3.5 Fax (KX-MB1520/KX-MB1530 only)Problem Cause & SolutionI cannot send documents. R The telephone line cord is connected to the [EXT] jack on

Problem Cause & SolutionI cannot select the desiredreceiving mode.R If you want to set FAX ONLY mode:– press MFax Auto AnswerN repeatedly to turn

Problem Cause & SolutionCallers complain that theycannot send a document.R There is no room left in the memory of your answering machine to record

11.1 Recording paper jam11.1.1 When the recording paper has jammedinside of the unitThe display will show the following:– “PAPER JAMMED” L“OPEN REAR

4. Push up the green levers (A) to the original position.A5. Close the rear cover.R Open and close the front cover to clear the errormessage.Case 2:Wh

3. Close the front cover.11.1.2 When the recording paper is not fedinto the unit properlyThe display will show the following:– “CHECK PAPER #1 PRESS S

11.2 Document jams (Automaticdocument feeder) (KX-MB1530only)The display will show the following:– “REMOVE DOCUMENT”Caution:R Do not pull out the jamm

2 Remove the jammed document (A) carefully.When the document has jammed near thedocument entrance:AWhen the document has jammed near thedocument exit:

1.3 Button descriptionsA B CD FEGHIJKMNOL* The pictured model is KX-MB1520/KX-MB1530.MQualityNR To select the contrast (page 31) and resolution(page 3

12.1 Cleaning the white plates andglassClean the white plates and glass when a black line, awhite line or a dirty pattern appears on:– your recording

12.2 Cleaning the documentfeeder rollers (KX-MB1530 only)Clean the rollers when documents frequently misfeed, orwhen a line or a dirty pattern appears

13.1 Reference lists and reportsYou can print out the following lists and reports for yourreference.– “SETUP LIST”– “TEL NO. LIST”*1– “JOURNAL REPORT”

Standby: Approx. 4 W (KX-MB1500)Approx. 4.3 W (KX-MB1520)Approx. 5 W (KX-MB1530)Preheat: Approx. 55 WCopy: Approx. 350 WMaximum: Approx. 950 W (When t

Toner cartridge lifeThe toner cartridge needs to be replaced regularly.Toner cartridge life depends on the amount of content ina printed document. Ton

14.1 Index##101 Date and time: 20#102 Your logo: 21#103 Your fax number: 22#110 Language: 51#114 Location: 51#120 Dialling mode: 17#121 Recall/F

Document size: 18EEasy Print Utility: 27ECM selection (Feature #413): 57Edge hold (Feature #473): 60Extension telephone: 43FFax activation code (

SScale selection (Feature #147): 52Scan features: 62Scan mode (Feature #493): 62Scan parameter hold (Feature #494): 62Scanner glass: 18, 31, 38Se

PNQX3909YA C0611KN1012

1.4 Overview1.4.1 Front viewNMAB C HJKL* The pictured model is KX-MB1520.DEF H IJ K LGABC* The pictured model is KX-MB1530.Speaker (KX-MB1520/KX-MB153