Panasonic DPMB536SX Provozní pokyny

DP-MB500 seriesOperating InstructionsMulti-Function Printer • Do NOT connect the unit to a computer with the USB cable until prompted to do so durin

Do not try to move the unit alone.Important• Do not carry the lower input tray and the unit together.• Ensure the unit is stable when moving it, serio

7.3.11 Sorting copies by rotationYou can sort output into sets of documents (collated) or into sets of pages (uncollated).Important• Make sure of the

• Make sure to align the document with the corner where the mark is located.7. : OK/SET / : "Scan"• Start scanning the bottom half and th

Document Result Solution1. /MENU 4 5 3 OK/SET*12. Increase the setting value to adjust the image position inthe direction of the arrows.3. :

7.4 Programming features: CopyTo change the feature settings, see page 49 for details.Feature Code DescriptionDefaultkeyInput tray settingfor copy#46

Feature Code DescriptionDefaultkeyFrame margin #474 To set the frame margin. When this feature is activated, yourcopies will be automatically reduced

8 Fax8.1 Availability of the fax featureImportant• The fax feature may not be available for your unit. See “List of available features andequipment”

8.4.1 Various settings for sending faxesTo select the contrastAdjust this setting depending on the darkness or lightness of the document. 5 levels (l

1. Set the original during fax reception or fax memory transmission.2. Enter the fax number using the dial keypad or address book.3. /STARTWhen using

Situation Mode SetupUse only as a faxYou have a separate telephoneline just for faxes, or you want touse the unit only for receivingfaxes.FAX ONLY1./F

8.6.2 TEL modeHow to receive phone calls and faxesYou have to answer all calls manually. To receive a fax document, press /START and then : 2 /: &

Feature HighlightsList of available features and equipmentThe following features and equipment may not be available for your unit. For explanations wi

Note• If you do not answer the call, the unit will activate the fax function.– Some fax machines do not generate fax calling tones when sending faxes,

1.The caller calls your unit.• The answering machine will answer the call.2.The caller can leave a message after the greeting message.3.The caller pre

"LONG DISTANCE": The caller made a long distance call.Touch panel screens for Caller ID COPY FAXSCAN PRINTQUICK JOBMENUWireless ECOQUICK J

2."Yes" Erasing specific caller information For 2-line LCD models ( ):1./MENU (repeatedly): "CALLER SEARCH" OK/SET2.Display t

P r o h i b i t o rJ u n k L i s t S e tJ u n k L i s t D i s p l a yJ u n k L i s t P r i n tO KO f fJ u n k F a x Prohibito rS e t t i

To print the junk fax prohibitor list For 2-line LCD models ( ):1./MENU (repeatedly): "JUNK FAX PROH."2. (repeatedly): "JUNK LIST PRIN

8.7 Advanced Fax feature8.7.1 Sending an electronic document as a fax message from your computer (PC faxsending)You can send an electronic document

To activate this feature, set the following beforehand:1.Activate the PC fax setting (feature #442).1./MENU 4 4 22. Select "ALWAYS" or &

To activate this feature, set the following beforehand:1.Set the web fax preview access code.1./MENU 4 5 0 OK/SET*12. Enter the programming pa

Useful information:If you are away from the unit for a long period of time, we recommend the following.1.Set this feature.2.Also activate PC FAX (page

Feature highlights when using a computerConnecting the unit to a computer and a network allows you to use convenient features for scanning and faxsend

To activate this feature, set the following beforehand:1. Program the email server settings for Internet fax.1. Start Multi-Function Station.2. [Devic

Using the one-touch dial feature ( )Using station 1-3Press the desired station key.Using station 4-6Press /LOWER , then press the desired station key

8.9 Programming features: FaxTo change the feature settings, see page 49 for details.Feature Code DescriptionDefaultkeyTEL/FAX delayedring count#212

Feature Code DescriptionDefaultkeyDelayed send #412 To reserve fax transmission up to 24 hours in advance of thedesired time. Set the original before

Feature Code DescriptionDefaultkeyConfirming thenext document#424 When this feature is activated, after the document isscanned using the automatic doc

Feature Code DescriptionDefaultkeyMemory receptionalert#437 To alert you with a beeping sound when a received faxdocument is stored into memory.Note•

Feature Code DescriptionDefaultkeyFax receive notify #451 When this feature is activated, the computer connected toyour unit using USB/LAN*1 will rece

9 Network9.1 Availability of the network featureImportant• The network feature (LAN or wireless LAN) may not be available for your unit. See "L

Feature Code DescriptionDefaultkeyProxy server #531 To set the proxy server for LAN connection.1. /MENU 5 3 12. Select "ENABLED". OK/S

Feature Code DescriptionDefaultkeyAll FTP/SMBaddress erase#578 To erase all FTP destinations and SMB folder destinationsstored in the unit.• Disconnec

Pull scanScanning from a computer You can scan the document from a computer (Pullscan). For details about this feature, see"6.3 Scanning from a c

Code Status Cause Solution113 Offline IP address is not determined,because the IP address isduplicated.Change the IP address.121 Offline The unit is a

Feature Menu SelectionSetting the IPfiltering[LAN FEATURE] Enter the IP filtering information.1.Select the [LAN FEATURE] from the menu.2.Click [Edit]

Feature Menu SelectionSetting the emailserver informationfor fax to emailaddress[EMAIL FEATURE] Enter the email server information to send faxmessage

10 Other Useful Features10.1 Reference lists and reportsYou can print out the following lists and reports for your reference.–"SETUP LIST"

To check the Caller ID list through the web browser interface (LAN and Caller ID supported models only)( )Important• Make sure the Caller ID list on w

Activating ecology mode: /MENU (repeatedly): "ECO MODE" OK/SET Select "ON" OK/SET: ECO "ECO" "ON&q

10.4.1 Touch panel screens for mode restriction COPY FAXSCAN PRINTQUICK JOBMENUWireless ECOQUICK JOBD e p a r t m e n t s e t u pP r i n t R e

5.If necessary, change the "PC PRINT" or "COPY" setting.Select the desired setting. "OK"Editing mode restriction for de

To set or edit the mode restriction through the web browser interfaceImportant• Make sure feature #154 is set to "ON" beforehand.1.Start Mul

10.5 QUICK-JOB featureYou can pre-program frequently used scan/copy types (up to 3 for each). The following setting items can be pre-programmed:Scan

Receiving faxesFax to email address (LAN supported modelsonly) ( )You can automatically transfer a received faxdocument (fax to email feature) to one

10.6 Mobile printingYou can print contents from your smart phone or tablet device, etc.10.6.1 Mobile Print (Panasonic application)The application is

For 2-line LCD models ( ): Password will be displayed after pressing .• When the connection is complete, "CONNECTED" will be displayed.*1Fo

5. Select [Proof Print].• You can enter a desired job name in [Job Name], up to 15 characters. If not entered, the application itselfwill assign the j

10.10 Central Management ControllerYou can manage and operate Multi-Function Printers via the network using this system.– You can monitor the number

3. Select the desired ring pattern assigned for fax. OK/SET*1*1For 2-line LCD models only. ()10.12 Lower input tray (optional) You can add a lower

• When removing the input tray from the unit, be sure that there is no recording paper remaining in the unit.Paper left in the unit may cause a paper

– DA-FAP109: approximately 4.5 kgApprox. 4.5 kg– DA-FAP110: approximately 5.2 kgApprox. 5.2 kg• Do not position the unit in a location where it is uns

For Windows Vista:[Control Panel] [Printers]For Windows 7/Windows 8/Windows 10:[Control Panel] [Devices and Printers]2.Select the unit's name.

11 Help11.1 Report messages (Fax supported models only) To indicate the unit’s fax transmission/reception status, one of the following messages will

11.1.1 Internet fax report messages (error code list)If an Internet fax could not be sent or received, an error code is displayed on the journal and

Table of Contents1 Introduction ... 191.1 Checking the suppli

Display Cause & Solution"CHECK PAPER #1"• Recording paper is not installed or the standard input tray has run out of paper.Install paper

Display Cause & Solution"FILE SIZE OVER"• When performing scan to FTP server or scan to SMB folder, the number ofscanned pages or the fi

Display Cause & Solution"RX MEMORY FULL"• The memory is full of received documents due to a lack of recording paper or arecording paper

Display Cause & Solution"USB MEMORY WRITEPROTECT"• The write-protection switch of the USB memory device is in the lock position.Unlock t

11.3 Interface messagesDisplay Cause & Solution"CONNECT ERROR"• IP address of the server or network configuration is incorrect. Consult

11.4 When a function does not work11.4.1 GeneralProblem Cause & SolutionThe unit does notwork.• Check the connections (page 28, page 33).The rec

Problem Cause & SolutionI cannot find the unit inthe [Target Device] or[Device Select]dialogue box whenoperating the followingfunctions.– Scanning

Problem Cause & SolutionA blank sheet isejected.• You placed the document facing the wrong way when using the copier.• The other party placed the

Problem Cause & SolutionI forgot the passwordfor the Secure Printfeature.• You may have changed the password. If you do not remember it, run theSe

11.4.4 CopierProblem Cause & SolutionThe unit will not makea copy.• You cannot make a copy during programming. Make the copy afterprogramming.• T

4.3 Registering items in the address book through a web browser (LAN supported models only) ...

Problem Cause & SolutionI cannot receive thewhole document (LANsupported modelsonly). ( )• The fax to email address (feature #452) is activated. I

Problem Cause & SolutionI cannot hear a dialtone.• The telephone line cord is connected to the [EXT] jack on the unit. Connect tothe [LINE] jack (

Problem Cause & SolutionI cannot print a filesaved on the USBmemory device.• There is no USB memory device inserted in the unit. Insert a supporte

11.4.7 Network (LAN supported models only) Problem Cause & SolutionI cannot operate thefollowing functions.– PC printing– Scanning– Remote Contro

Problem Cause & SolutionThe [Windows SecurityAlert] dialogue boxappears and asks if Iwant to block[PCCMFLPD] and Icannot operate thefollowing func

11.4.9 Using an answering machineProblem Cause & SolutionI cannot receivedocumentsautomatically.• Your greeting message on the answering machine

To confirm the security settings (For Windows 7/Windows 8/Windows10 users)1. [Control Panel] [System and Security] [Windows Firewall] [Advanced

12 Paper Jams12.1 Recording paper jamThe display will show the following:– "PAPER JAMMED" "OPEN REAR COVER"12.1.1 When the reco

• If paper is jammed near the rollers, see case1 (page 168).• If paper is jammed near the fuser unit, seecase 2 (page 168).• If paper is jammed near t

A BCAUTION• The fuser unit ( ) gets hot.Do not touch it.Case 3: When the recording paper has jammednear the automatic duplex unit:• If the top edge of

8.6.6 Junk fax prohibitor ... 1

A2. Remove the jammed paper ( ) carefully.A• If you cannot remove the jammed paper,open the internal cover ( ), remove thepaper(), then close the inte

A3. Insert the multi-purpose tray into the unit.12.1.3 When the recording paper hasjammed near the lower input tray Remove the jammed paper by follow

A2. Remove the jammed paper ( ) carefully.AIf the message indicating the paper jam is stilldisplayed, continue to Step 3 (page 172).3. Insert the inpu

Note• If the centre of the recording paper guide ispinched too much, it could cause a paperfeeding error.• If the message is still displayed, check th

12.2 Document jams (Automaticdocument feeder) The display will show the following:– "REMOVE DOCUMENT"CAUTION• Do not pull out the jammed do

• Press /STOP to clear the message.12.2 Document jams (Automatic document feeder) Operating Instructions 175

13 CleaningCAUTION• Do not use paper products, such as papertowels or tissues for cleaning.• Do not use flammable aerosol cleaners.13.1 Cleaning the

13.2 Cleaning the documentfeeder rollers Clean the rollers when documents frequentlymisfeed, or when a line or a dirty pattern appears ondocuments.1.

13.3 Cleaning the recordingpaper feeder rollers of the multi-purpose trayClean the recording paper feeder rollers whendocuments fed from the multi-pu

13.4 Cleaning the pickup rollersClean the pickup rollers when documents fed fromthe standard input tray frequently misfeed.1. Turn the power switch O

12.1 Recording paper jam ... 16712.

13.5 Cleaning the drum cartridgeImportant• If the groove of the drum cartridge is dirty,lines or dirty patterns may appear onprinted sheets. Be sure

14 General Information14.1 SpecificationsItem SpecificationsPrinter type Laser PrinterMemory capacity (for operation and storingmemory)DP-MB536512 M

Item SpecificationsEffective printing widthLetter (Landscape): 271 mm, Legal: 208 mmA4 (Landscape): 289 mmScanning resolutionUp to 1,200 × 1,200 dpi (

Item SpecificationsComputer interfaceUSB*11*12LAN (10 Base-T/100 Base-TX/1000 Base-T)*6*11Wireless LAN (IEEE802.11b/g/n)*13Copy resolution Up to 1,200

Item SpecificationsInternet fax*6*7CommunicationsprotocolTCP/IP, SMTP, POP3, SMTP AUTH, POP before SMTPEmail formatMIME Base 64 Content-type: Image/TI

ITU-T No.1 Test Chart14.1 SpecificationsOperating Instructions 185

Supported recording paper size: Supported duplex printing.▲: Not supported duplex printing.PapersizeStandard input tray Multi-purpose trayLower input

PapersizeStandard input tray Multi-purpose trayLower input tray(DA-FAP109)Lower input tray(DA-FAP110)PortraitLandscapePortraitLandscapePortraitLandsca

Tray type Paper typeInput tray capacity*1Output tray capacity*2Multi-purpose trayThin paper(60 g/m² to 75 g/m²)100*3150Plain paper(75 g/m² to 80 g/m²)

Paper size(width × length)Item SpecificationsPlain paper/Thin paper/Thickpaper/LabelA4 210 × 297 mm (8.3 × 11.7 inch)A5 148 × 210 mm (5.8 × 8.3 inch)A

1 Introduction1.1 Checking the supplied accessoriesDrum cartridge(pre-installed insidethe unit) (startertoner included*1)Power cord*2CD-ROM(includin

*2 For simplex printing*3 For duplex printing*4 DA-FAP110 onlyToner cartridge lifeThe toner cartridge needs to be replaced regularly. Toner cartridge

Waste disposal methodWaste material should be disposed of under conditions which meet all national and local environmentalregulations.14.1 Specificati

14.2 Information of copyrights and licences (LAN supported modelsonly) * "This product includes cryptographic software written by * E

IndexSymbols#101 Date and time...30#102 Your logo...

#549 Firmware update... 130#557 WSD (Web Service for Devices)... 128#559 AirPrint...

DHCP mode (Feature #500)... 127Dial keypad entry restriction (Feature #421)... 123Dialling mode (Feature #12

Mobile printing...140Mode restrictionActivating (Feature #154)...

Scan features... 85Scan mode (Feature #493)... 85Scan p

Note198 Operating Instructions

NoteOperating Instructions 199

Thank you for purchasing a Panasonic product. Object models of this manual:Suffix Model No.AGDP-MB536AGDP-MB545AGCXDP-MB536CXDP-MB545CXEUDP-MB537EUDP-

1.2 Overview1.2.1 Front viewG IHECBAL OJ KFDNM PartsPower switchDocument coverOutput trayADF (Automatic Document Feeder) coverDocument entranceDocum

PNQX7872WA P1215KU3036Panasonic System Networks Co., Ltd. 2016

1.2.2 Rear viewAB C D E FG H I PartsSpeakerHandset connection jack*1External telephone line jackLEDUSB interface connectorLAN interface connector• 10

1.3 Operation panel descriptions1.3.1 Button descriptions DP-MB537/DP-MB545A B CF HE GD Buttons Descriptions/FAX AUTO ANSWER*1To turn the auto answ

Buttons Descriptions/QUALITY To select the contrast and resolution when copying./QUALITY*1To select the contrast and resolution when sending a fax./PA

Buttons DescriptionsNavigator keyTo adjust the following volume*1:– ringer volume (while setting the operation mode to faxmode)– monitor volume (while

Display DescriptionsAmount of toner remaining./QUICK JOB To use QUICK-JOB features./MENU To start programming.WirelessTo start wireless LAN setting.To

2 Installation andPreparation2.1 Drum cartridgeThe supplied drum cartridge includes starter toner(toner cartridge is not supplied).• When using the

AA6. Remove the protective sheet ( ) from the drumcartridge.• Do not touch or scratch the drum surface.A7. Shake the drum cartridge horizontally more

Note• To ensure that the unit operates properly, werecommend the use of Panasonic tonercartridge and drum cartridge. See page 19for accessory informat

Note• After connecting the cables, open the rearcover and re-attach the connector-panel coverto the original position, and then close the rearcover fi

• Avery is a trademark of Avery Dennison Corporation.• Mac, OS X and Bonjour are trademarks of Apple Inc., registered in the U.S. and other countries.

For Germany and Austria only:Connector pinouts (fax supported modelsonly) ( )Socket "To phone line"25431 a22 —3 La4 Lb5 —6 b2 61Conne

Protocol) address, subnet mask, and defaultgateway to the unit.1. After connecting the LAN cable to the unit andthe computer, turn the power switch ON

• If the unit enters standby mode during theprocess, repeat from step 1 (the PIN code willbe renewed).*1For 2-line LCD models only. ( )2.6.3 WPS inco

2.8 Installing software (includingprinter, scanner and otherdrivers)Panasonic Multi-Function Station software enablesthe unit to carry out the follow

Important noticeWhen installing using a USB cable connection, amessage may appear during the softwareinstallation. This is normal and the software wil

To modify the software (To add or uninstall eachcomponent)You can select the components to install or uninstallanytime after the installation.1. Start

3 Basic Operations3.1 Operating the unit's panel3.1.1 Selecting the operation mode for touch panel models You can select the desired mode by t

– Paper with foreign objects attached, such as tabs or staples– Paper that has dust, lint or oil stains– Paper that will melt, vaporize, discolour, sc

A2. Pinch the right recording paper guide ( ), then slide it to outside (the left recording paper guide will moveby itself).Pinch the centre of the re

AB• If necessary, slide the recording paper guides toadjust the width to the size of the recording paper.Note• If the centre of the recording paper gu

END USER LICENCE AGREEMENT1. SOFTWARE“Software” means the computer programs contained in the package, together with all codes, techniques,software too

• If the standard input tray does not close, the plate in the standard input tray may not be in the lockedposition. Push the paper down and make sure

– For models other than AG/SX: approximately4.5 kg– For AG/SX models: approximately 5.2 kgApprox. 4.5 kgApprox. 5.2 kg3.2.2 Multi-purpose tray• To se

2. Lift up the cover over the guides ( ) until it clicks into place.A3. Load the paper with print-side up, then adjust the width of the guides ( ) to

ANote• If the paper is not inserted correctly, re-adjust the paper, or the paper may jam.3.2.3 Output trayYou can temporarily expand the output tray

• To make a portrait copy, set the original in portrait direction. To make a landscape copy, set the original inlandscape direction.3. Close the docum

• When feeding certain types of document (for example, if back of the page is not clean) through theautomatic document feeder, it is possible that dir

3.4 Multi-Function StationTo start Multi-Function Station, see the following.[Start] [All Programs] [Panasonic] the unit's name [Multi-Fu

[Settings] (page 47)• To change the general settings.• To change the settings for scanning.[Help]• For detailed instructions on Multi-Function Station

1.[Control Panel] [Internet Options] [Programs] [Set programs] [Set program accessand computer defaults]• If the [User Account Control] dialogu

3.5 Programming the unit from the operation panelImportant• For feature availability and selection information for your unit, print the "SETUP L

8. TERMINATIONYou may terminate your licence at any time by destroying the Software and all your copies of it or asotherwise described in these terms.

Feature Code DescriptionDefaultkeyDialling mode #120 If you cannot dial, change this setting according to yourtelephone line service.–Recall/Flash tim

Feature Code DescriptionDefaultkeySet all features todefault#159 Before you dispose of, transfer or return the product, activatethis feature to reset

Feature Code DescriptionDefaultkeyTime adjustment #226 Using this feature, the unit's date and time setting will beautomatically adjusted when ca

Feature Code DescriptionDefaultkeyPaper size in thelower input tray 1#382 To set the recording paper size in the lower input tray 1.Note• If the custo

Feature Code DescriptionDefaultkeyPaper size in thelower input tray 2#389 To set the recording paper size in the lower input tray 2.Note• If the custo

Feature Code DescriptionDefaultkeyLeft margin settingfor input tray#394 To set the left margin for input tray.1. /MENU 3 9 42. Select the desired

Feature Code DescriptionDefaultkeyToner save #482 To set the toner save feature. When this feature is activated, thetoner cartridge will last longer.N

3.8 Status of the unit3.8.1 Using Remote ControlYou can easily operate the following functions from your computer.– Programming the features (page 4

2. Select a category from the menu.[Status]: Toner and paper information, etc.[Information]: Current status of the unit and network information, etc.3

4 Telephone Number and Email Address4.1 Character entry (Fax or LAN supported models only) For 2-line LCD models ( ):The dial keypad is used to ent

Important InformationFor your safety (emergency processing method)Laser radiationCLASS 1 LASER PRODUCT• The printer of this unit utilises a laser. Use

For EU (German/Italian)2 3 4 5 6 7 8 9A C2BÄÀD E F3ÈG H I4ÌJ K L5M N O6ÒÖP Q RS7T U8VÙ ÜWXYZ9a b c2à äd e f3èg h i4ìj k l5m n o6ò öp q rs7ßt u v8ùüw x

To delete a character.*1 Several types of symbols cannot be entered for certain features.*2 The characters will vary depending on suffix and/or langua

4.2 Storing telephone number and email address from your unit (Faxor LAN supported models only) 4.2.1 Touch panel screens for address book and broad

– "Email Fax": To use the email address for Internet fax.– "Direct SMTP": To use the email address for Direct SMTP.5."OK"

For touch panel models ( ):1.Display "Address Book" screen (page 62).2.Select the desired item.3.Edit the name if necessary.4.Edit the tele

• Select Fax or Email Fax. OK/SET . To use the broadcast memory for Internet fax, select Email Fax.3. Select the desired broadcast key.4. Program i

4.3 Registering items in the address book through a web browser(LAN supported models only) You can register, edit or erase items in the address book,

Feature SelectionRegistering and editingemail address andtelephone number inthe one-touch dial ( )Register email address and telephone number. These i

5 Printing5.1 Printing from Windows applicationsYou can print a file created in a Windows application. For example, to print from WordPad, proceed a

Recording paper type Media typeJapan Postcard [Japanese Postcard]*2*1 Select [Envelope #10], [Envelope DL], [Japanese Envelope You #4], [Japanese Enve

Recording paper exit rollers and fuser unit• During or immediately after printing, near therecording paper exit roller shaft ( ) and fuser unit() gets

• Please refer to page 187 for information on recording paper.• Use the multi-purpose tray to print on special media.• To load paper, see page 41.To p

Note• Wrinkles and waving may occur in some cases, even if high quality envelopes are used.• Avoid printing in high humidity. High humidity may cause

Clasp Transparent windowTo print on Japan postcards• Use the standard Japan postcards.• Do not use Japan postcards for ink-jet printers.• When you loa

5.2 Easy Print UtilityBy printing using the Panasonic Easy Print Utility instead of the printer driver, you will have access to manyuseful and conven

Note• The maximum number of documents that can be displayed in the [Print Page Operation] window is 999pages.Saving a file as PDF fileYou can save the

Note• The following types of file formats can be printed:– TIFF– JPEG– PDF (Image type only, such as files scanned from the unit or files scanned from

To select the page layout ("N in 1 TYPE")You can save paper by printing 2, 4 or 8 pages onto 1 page. The documents’ size will be reduced to

5.4 Programming features: PC printTo change the feature settings, see page 49 for details.Feature Code DescriptionDefaultkeyInput tray in PCL #760 To

Feature Code DescriptionDefaultkeyFont number inPCL#769 To set the font number to be used in PCL printing. The unitassigns a number to each font.Enter

Feature Code DescriptionDefaultkeyNumber of copiesin USB print#660 To set the number of copies to print. Enter the desirednumber of copies from "

AB– Do not place the drum cartridge near dust or dirt, or in a high humidity area.– Do not expose the drum cartridge to direct sunlight.• To extend th

6 Scanning6.1 Touch panel screens for scanning COPY FAXSCAN PRINTQUICK JOBPC Em a i l A d d r e s s F T P ServerS M B F o l derUSB Memory6.2

Note• When scanning a document, we recommend using the scanner glass rather than the automatic documentfeeder for better results. ( )• Do not open the

"FILE"*2"EMAIL"*2―"OCR"*2―"CLOUD"*2"EMAILADDRESS"*3*4―"FTP SERVER"*3*4―"SMB FOLDER&qu

Setting the information for scan to FTP server (LAN supported models only) ( )When you send scanned files to an FTP server, you can register the FTP d

6.3 Scanning from a computer (Pull Scan)Note• When scanning a document, we recommend using the scanner glass rather than the automatic documentfeeder

• You can save images in TIFF, JPEG, PNG, BMP or PDF formats. To change the format, click [File] [Environment Setup], and then change the settings in

7 Copying7.1 Touch panel screen transition for copying COPY FAXSCAN PRINTQUICK JOBQ u a l i t yC o p y S i z eD u p l e xP a g e L a y o u tS e

– Image repeat feature (page 93)– Poster feature (page 94)– N in 1 feature (page 95)– Separate N in 1 feature (page 96)– Booklet feature (page 97)– Ed

– "TEXT": For text only.– "PHOTO": For photographs, shaded drawings, etc.– "HIGH-RES" (scanner glass only): For small te

7.3 More copying featuresImportant• Make sure that the unit is set to the copy mode.7.3.1 Zoom copy (enlargement / reduction)Document setting Enlarg

AARoutine care• Wipe the outer surface of the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder.Moving the unitThe unit is h

7.3.2 Duplex featureDuplex type Binding/Originals type Document setting1-sided originals to 2-sidedcopies"LONG EDGE""SHORT EDGE"S

7.3.3 Collate copyThe unit can collate multiple copies in the same order as the original document pages.Example: Making 2 copies of a 4-page original

7.3.4 Quick ID copy feature/Image repeat feature (Scanner glass only)Quick ID copy feature: To copy 2-sided documents onto one page.Quick ID copy&quo

Image repeat feature: To copy a single document repeatedly onto one page.Image repeat"2 in 1" "4 in 1" "8 in 1"Original

7.3.5 Poster feature (Scanner glass only)You can make copies divided into 2, 4 or 9 sections to make enlarged copies of the individual sections. You

7.3.6 N in 1 featureYou can save paper by copying 2, 4 or 8 pages onto one page. The documents will be reduced to fit therecording paper.N in 1"

7.3.7 Separate N in 1 feature (Scanner glass only)You can separate an N in 1 copied document back into its original, separate pages. This feature is

7.3.8 Booklet featureYou can make copies, and then fold them in half to create booklets. The documents will be reduced to fit therecording paper.8765

7.3.9 Edge featureYou can set the unit not to copy the outer edges of the document without reducing the copied documents to fitthe recording paper. T

7.3.10 Margin featureYou can set the unit not to copy a particular edge of the document to make a margin. This is useful for bindingthe copied docume