Panasonic WJ-HDE300 Manuál s instrukcemi stáhnout pdf (Strana 10)

2-2 Slide the front cover to the left.

2-3 Pull the front cover toward you.

2-4 Disconnect the harness.

2-5 Remove the six screws (marked with ∆) and detach

the thin metal plate covering the front side.

2-6 Disconnect the connectors when adding or replac-

ing the HDDs.

3. Remove two of the HDD mounting brackets.

• Remove the four screws and pull the brackets toward

you.

• When replacing an HDD, remove it from the bracket.

4. Prepare the HDDs to be fixed on the brackets.

• Release the static electricity from your body before

touching the HDDs.

• Put the conductive bag (in which the HDD was packed)

on a soft surface and place the HDD on it with the cir-

cuit board side down.

5. Fix the HDDs on the brackets.

5-1 Slide the HDD onto the bracket.

5-2 Tighten the screws with the dampers and the

sleeves (supplied four pieces each) to fix the HDD

on the bracket.

6.Repeat step 5 to fix all the HDDs on the bracket.

• Do not use an electric screwdriver to fix them.

Recommended tightening torque = 0.49 N·m {5 kgf·cm}

2 - 4

Damper

Sleeve

2 -5

2 - 2

2 - 3

2 -6

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Žádné komentáře

Panasonic WJ-HDE300 Manuál s instrukcemi Strana 10