Panasonic WJ-ND400 Instalační příručka stáhnout pdf (Strana 33)

About the connectors

■ How to use the terminals of the ALARM/CONTROL connector

These terminals are used for emergency recording, auto time adjustment, taking measures against power outages, and when install-

ing a buzzer, a lamp, or similar alarm device.

The connector to be used should be compatible with the pin configuration.

● Pin configuration

The pin array is different from other network disk recorders. Make sure

that the connection is correct by referring to the following.

13 1

ALARM/CONTROL

Pin No. Signal

Operation Remarks

1 Alarm input 8

Event action will be performed according to

the settings.

Non-voltagemakecontact,+5Vpull-up

150 kΩ

2 Alarm input 9

3 Alarm input 10

4 Alarm input 11

5 Alarm input 12

6 Alarm input 13

7 Alarm input 14

8 Alarm input 15

9 Alarm input 16

10 Network error output

Signal output upon detection of a disconnect-

ed Ethernet link. Signal output upon DHCP IP

address expiration.

Open collector output/24 V DC max., 100 mA

11 Alarm reset input Canceling the alarm display

Non-voltagemakecontact,+5Vpull-up150kΩ

12 Emergency recording

input

Starting emergency recording signal input

13 Signal ground

14 Signal ground

Available disk space

warning output

Signal output for available (remaining) disk

space warning of the normal recording area/

event recording area/copy area

Open collector output/24 V DC max., 100 mA

16 HDD error output

Signal output upon detection of an HDD error

17 Camera error output

Signal output upon detection of a camera error

18 Error output

Signal output upon detection of a recorder

error

Outage processing end

output

Signal output upon completion of outage

processing

High(+5Vto+12V,6.3mAmax.)

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 63 64

Komentáře k této Příručce

Žádné komentáře

Panasonic WJ-ND400 Instalační příručka Strana 33

Komentáře k této Příručce

Související produkty a manuály pro Disková pole Panasonic WJ-ND400