Panasonic WV-ASC970 Provozní pokyny stáhnout pdf (Strana 41)

■

Lens Control

Note:

 • Checkthataspecifiedlens,withmotorizedzoom/

focus functions, is mounted on the camera, and

the lens selection (DC/VIDEO) on the camera is set

to DC.

 • Availablefunctionsdifferdependingoncameras.

Refer to the Operating Instructions of camera.

1. Select the desired monitor and camera. (Refer to

p. 39 Monitor Selection and Camera Selection.)

2. Press the FOCUS FAR or NEAR button while

watching the monitor. The lens focus is adjusted to

obtain a sharply focused image.

Note:

 • PressingtheBbuttonortopbuttonof3Djoystick

unit can also set the lens focus automatically.

3. To adjust the lens zoom, move the zoom wheel

controller to the right (TELE) or left (WIDE).

4. Press the IRIS OPEN or CLOSE buttons to open/

close the lens iris. The lens iris is adjusted by these

buttons to obtain the proper image exposure.

Note:

 • Toreturnthelensiristothefactorydefaultstatus,

press the A button of 3D joystick unit.

■

Pan/Tilt Control

● Manual Operation

1. Select the desired monitor and camera. (Refer to

p. 39 Monitor Selection and Camera Selection.)

2. Move the 3D joystick to move the pan/tilt head

towards the desired direction.

Note:

 • Ifyoumovethe3Djoystickwidely,youcanpan

and tilt the camera faster.

 • Panning/tiltingspeeddiffersdependingoncamer-

as.

● Auto Panning

Refer to p. 54 Auto Mode for how to operate.

●Program Preset Position

1. Select the desired monitor and camera. (Refer to

p. 39 Monitor Selection and Camera Selection.)

FAR

FOCUS

NEAR

Top button

WIDE

TELE

Zoom wheel controller

OPEN

IRIS

Camera Site Accessories Control

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 78 79

Komentáře k této Příručce

Žádné komentáře

Panasonic WV-ASC970 Provozní pokyny Strana 41

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Panasonic WV-ASC970