123456789Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.The model
10Setup items DescriptionReference pageMaintenanceProduct information Versions of the software, the hardware (this recorder), MAC address, serial numb
100Problem Check item/RemedyReference pagePlayback of recorded images stops, and resumes after a while.Playback of recorded images may stop when auto-
101Message displayed on the information barDepending on the operation system in use, the following may occur. Follow the instructions below when the f
102Symptom SolutionsThe following message is displayed on the informa-tion bar when tried to execute a downloaded file. "The publisher could not
103GlossaryThis manual uses the following words.ActiveX ControlA software module developed by Microsoft. It is used to add functions, downloaded from
104FTPA protocol that is commonly used for transferring files over the Internet.FirewallA type of security used when accessing outside net-works like
105POP 3 ServerA server that supports POP3, currently the most widely used mail sending protocol.Plug-in SoftwareSmall programs used to add functions
106SMTPA protocol for sending e-mail on the Internet or an Intranet. Used when transferring mail between servers or when clients send mail to the serv
107IndexAAbbreviations ... 4About the operation window ...
108Go to last before ... 31Group ...
109RRec. cam. ... 40, 42Recorded time range ...
11Network settingsNetwork settings of the recorderConfigure the following settings for the ports to be used. The following settings can be configured
For U.S. and Canada:Panasonic System Communications Company of North America,Unit of Panasonic Corporation of North Americawww.panasonic.com/business/
121 Confirm that the standby display is on the LCD. When a display other than the standby display is on the LCD, continue pressing the [ESC] butto
13Network settings of a PCChange the TCP/IP setting of the PC to conform to the settings of the recorder. It is necessary to set the IP address of the
146 Click "Properties". The "Local Area Connection 2 Properties" window will be displayed.7 Click "Internet Protocol (TC
15About the operation windowDisplay/Close the operation windowDisplay the operation window using a web browser installed on a PC. 1 Boot the PC.2
165 Configure the settings and perform operations by clicking the buttons and the tabs on the oper-ation window.Important: • Ifamessageisdispla
17Major operating controls and their functionsTop page q [Control] button (page 18) The operation panel will be displayed by clicking this but
18[Control] buttonThe following operation panel will be displayed when the [Control] button is clicked. q [Multiscreen select] box Images from up
19 u List display area Number of listed data (recording events or logs) Total number of listed data (recording events or logs) will be displaye
2ContentsPreface ... 3About the user manuals ...
20[Setup] buttonThe following operation panel will be displayed when the [Setup] button is clicked. q [Quick] button Displays the "Quick"
21Status display area q The status of the recorder such as the status, playback status, etc. will be displayed. : Indicates that live images ar
22 [ALM] button : Indicates an event occurrence. The alarm action will be canceled by clicking this but-ton. (Refer to the operating instruction
23 r [PLAY] button Plays recorded images. t [NEXT RECORD] button Skips to the next recorded image and plays it. y [FF] button Plays record
24[CAM] tabWhen displaying live images from a camera with the panning/tilting function, it is possible to operate the camera (pan/tilt, zoom, focus, b
25Basic operation 1 Access the recorder and display the top page of the operation window.2 Click the [Setup] button. The setup menu buttons wi
26Quick settingsConfigure the minimum settings required to operate the recorder such as the language setting, time & date, net-work settings, came
271 Click the [Quick] button. The "Quick" page will be displayed.2 Configure each setting item. Refer to "Setup items" men
28Camera registrationRegister cameras in the recorder. Up to 64 cameras can be registered. 1 Click the [Quick] button. The "Quick" pa
29 The "Camera Registration Result" window will be displayed after the registration is complete.6 Check the registration result. • Up
3PrefaceThe network disk recorder (WJ-ND400K, WJ-ND400K/G) is designed for use within a surveillance system, and record images/audio from the connecte
30Program setupSelect a program that determines basic operation of the recorder such as the live image transmission rate, record-ing rate, etc. 1
31Basic settings RecordingSelect "On" or "Off" to determine enable or disable the recording function of the recorder.When "O
32 Date display formatSelect a date display format from the following.(Ex. April 1st., 2009)YY.MM.DD: 09.04.01MMM.DD.YY: APR.01.09DD.MMM.YY: 01.APR.0
33 Auto adjustment timeSelect a method of auto clock adjustment from the fol-lowing.Off (default): Does not adjust clock automatically.Slave: Receive
34Emergency recordingConfigure the settings relating to emergency recording such as recording duration, recording rate, etc. Refer to the installation
35 Audio rec.Select "On" or "Off" to determine whether or not to record audio together with images.Audio can be recorded together
36Note: • Otheruserscurrentlyaccessingtherecorderwillforcibly be logged out. They need to log in to the recorder again after the measurement.
37Note: • Dependingonthegaptimebetweentheschedulesor on the total data size of the SD memory data to be obtained, it may be impossible to ob
38EventConfigure the settings of event recording that is to be performed at an event occurrence. Event recording includes the pre-event recording (rec
39 • Recordalog A log that contains the event type and the time and date of the event occurrence will be recorded. (Event log) • Sendrecorde
4Other: CD-ROM drive: It is necessary to refer to the operating instructions and use the software on the provided CD-ROM. DirectX® 9.0c or later Ad
40 Rec. cam.Select a camera channel (Cam.1 - Cam.64, "--") used for recording. When no camera channel is selected ("--"), record
41 Site alarmSelect "On" or "Off" whether to validate or invalidate the site alarm.On: Validates the site alarm.Off: Invalidates
421 Click the [Event] button.2 Click the [Command alarm] tab. The "Command alarm" page will be displayed. 3 Configure each setting
43Schedule recordingConfigure the settings of the schedule recording by designating a day of the week and time.ProgramSet the settings of programs suc
44 ModelThe model of the network camera will be displayed. CompressionThe compression method of the selected camera will be displayed.Refer to the &
45Note: • Imagesfromacamerachannelforwhichthepre-event recording area is created on the hard disk drive will be recorded on the created pre-
46 • Dependingonthetimingofaneventoccurrence,the recording duration of the recorded data may not be exactly same as the set recording durati
47 Start*1Set the start time of the time zone.--/00:00 - 23:45Note: • Repeatsteps1-5tosetprogramsofanotherdayofthe week. • Timefrom&q
48 FTP transmission by periodic timerSelect "On" or "Off" (default) to determine whether or not to send images to the FTP server
49CameraConfigure the network settings of the camera (address, port number, etc.) and the settings relating to the camera group and the sequence displ
5Restrictions when operating MPEG-4 imagesThere are following restrictions when "MPEG-4" is selected for the image compression method of &qu
50 ModelThe model of the detected camera will be displayed. MAC addressThe MAC address of the detected camera will be dis-played. IP addressThe IP
51Change the order of the registered camera number (4-screen display)1 Click the [Camera] button.2 Click the [NW camera] tab. The "NW camera
52 ManufacturerSelect the manufacturer of the camera.Panasonic (default)/Axis Model/CompressionSelect the model of the camera and the image com-pres
53Note: • Whentheregisteredcameraisdisconnected,the"CONNECTERROR"indicationwillbedisplayed.Inthiscase,select "--"
54GroupSet the title of the camera group. 1 Click the [Camera] button.2 Click the [Group] tab. The "Group" page will be displayed.
551 Click the [Camera] button.2 Click the [Sequence] tab. The "Sequence" page will be displayed.3 Configure each setting item. Refe
56 Sequence display typeSelect "1-screen" (default) or "4-screen" for "Sequence display type". 1-screen live sequence[
57Server1 Click the [Server] button.2 Click the [NTP] tab. The "NTP" page will be displayed. 3 Configure each setting item. Refe
581 Click the [Server] button.2 Click the [FTP] tab. The "FTP" page will be displayed. 3 Configure each setting item. Refer to &
59 IntervalEnter a number for transmission interval.Enter a number (0.1 - 0.9 (in steps of 0.1),1-1440) for transmission interval, and select "s
65. When copying imagesCopying may start from a point several seconds (*) later than the designated start time when copying MPEG-4 images. To copy the
601 Click the [Server] button.2 Click the [Mail] tab. The "Mail" page will be displayed. 3 Configure each setting item. Refer to
61 User nameEnter the user name (login name) to be required for the authentication.Enter up to 32 alphanumeric characters. The available characters a
621 Click the [Server] button.2 Click the [Proxy] tab. The "Proxy" page will be displayed. 3 Configure each setting item. Refer
63Network1 Click the [Network] button.2 Click the [Basic] tab. The "Basic" page of "Network" will be displayed.3 Configure e
64 NW link down detectionSelect "On" or "Off" (default) to enable or disable the disconnection detection of the network line conn
65Network setup - Camera port/Client PC port DHCPSelect "On" or "Off" (default) to determine whether or not to use the DHCP serve
66Static route Static route settingSelect "On" or "Off" (default) to determine whether or not to validate the static route settin
671 Click the [Network] button.2 Click the [DDNS] tab. The "DDNS" page will be displayed. 3 Configure each setting item. Refer t
681 Click the [Network] button.2 Click the [SNMP] tab. The "SNMP" page will be displayed. 3 Configure each setting item. Refer t
691 Click the [Network] button.2 Click the [Panasonic alarm protocol] tab. The "Panasonic alarm protocol" page will be dis-played. 3
7Operation flowThe operation flow of the recorder is as follows.Install the recorder in the rack. (Refer to the installation guide.)Go to step 2 when
70User management1 Click the [User mng.] button.2 Click the [Basic] tab. The "Basic" page of "User mng." will be displayed.
711 Click the [User mng.] button.2 Click the [Administrator] tab. The "Administrator" page will be displayed. 3 Configure each sett
721 Click the [User mng.] button.2 Click the [User] tab. The "User" page will be displayed. 3 Configure each setting item. Refer
73Note: • Evenwhenthe[Registration]buttonisclicked,otherlogin users will not be logged out.Edit the user settings1 Edit the user settings2
741 Click the [User mng.] button.2 Click the [Host] tab. The "Host" page will be displayed. 3 Configure each setting item. Refer
75Edit the host settings1 Click the [User mng.] button.2 Click the [Host] tab. The "Host" page will be displayed.3 Select the host nam
761 Click the [User mng.] button.2 Click the [User level] tab. The "User level" page will be displayed. 3 Configure each setting it
77Function Settings DescriptionError log status Checked*1*2/Unchecked*3*4It is possible to display error logs. (Refer to the operating instructions (P
78Maintenance1 Click the [Maintenance] button.2 Click the [Product information] tab. The "Product information" page will be displayed.
791 Click the [Maintenance] button.2 Click the [Disk information] tab. The "Disk information" page will be displayed.3 Check each item
8Setup menu and its itemsIt is necessary to configure the settings on the setup menu in advance to use the recorder. The setup menu will be displayed
80Disk informationItem DescriptionRecording information When the [Display] button is clicked, the "Recording information" window will be dis
81Recording informationItem DescriptionCapacity Capacity of the hard disk drive will be displayed.Remain capacity Remaining capacity of the hard disk
82Network informationItem DescriptionNetwork informationAddress Information of each port of the recorder and IP addresses of the connected device will
83Disk end mode Normal recording areaThe oldest data will be overwritten and saved as new data when capacity of the normal recording area has run out
841 Click the [Maintenance] button.2 Click the [Disk] tab. The "Disk" page will be displayed. 3 Configure each setting item. Ref
851 Click the [Maintenance] button.2 Click the [Settings management] tab. The "Settings management" page will be displayed. 3 Click
86Disk config.The hard disk drives in the recorder are managed by virtually dividing into 4 recording areas.Only one of the 4 recording areas can be a
871 Click the [Config.] button. The authentication window will be displayed. 2 Enter the administrator name and the password, and then click t
88Disk informationItem DescriptionOperational mode The operational mode of the recorder will be displayed. Single mode/RAID5 mode/RAID6 modeTotal capa
89Disk format1 Click the [Config.] button. The authentication window will be displayed. 2 Enter the administrator name and the password, and t
9Setup items DescriptionReference pageServerNTP Settings that are required to correct time based on the NTP server, such as the NTP server address, ca
903 Click the [Format] button. The "Format" page will be displayed.4 Select the hard disk drive to be formatted and select the recordin
911 Click the [Config.] button. The authentication window will be displayed. 2 Enter the administrator name and the password, and then click t
923 Click the [Format] button. The "Format" page will be displayed.4 Click the [Pre-event recording area] tab. The "Pre-event r
93Notification by e-mailAlarm mailThe recorder address will be described on an alarm mail as follows. Contents of the alarm mailND400 (192.168.0.250),
94Display DescriptionRemove auto links (per unit): Recorder:MAINLOGICALLYREMOVED Extensionunit:EXTxLOGICALLYREMOVED x is unit number.RAID5 reco
95Display DescriptionSingle mode format failure: Recorder: MAIN-y SINGLE FORMAT ERROR Extension unit: EXTx-y SINGLE FORMAT ERROR x is unit number, y i
96TroubleshootingCheck the following before requesting repair. Contact your dealer if a problem cannot be solved even after check-ing and trying the s
97Problem Check item/RemedyReference pageThe image is not being refreshed.Depending on the traffic of the network, there might be difficulties in disp
98Problem Check item/RemedyReference pageWhen displaying MPEG-4 images on a multi-screen, images from two cameras or more are displayed in sequence on
99Problem Check item/RemedyReference pageAudio cannot be recorded. Audio cannot be played cor-rectly.Is the audio output setting of the camera set cor
Komentáře k této Příručce