
50
■ Model
The model of the detected camera will be displayed.
■ MAC address
The MAC address of the detected camera will be dis-
played.
■ IP address
The IP address of the detected camera will be dis-
played.
■ New IP address
Enter an IP address to be assigned to the detected
camera.
■ DHCP
Select "On" or "Off" (default) to determine whether or
not to use the DHCP server.
Note:
• Whenthedetectedcamerasareregistered,alllogin
users will forcibly be logged out.
• Allrecordingswillstopintheprocessofthecamera
registration.
• Thecameraslocatedinthedifferentsubnetviaa
router cannot be detected.
• Toenhancethesecurity,acameracanbedetected
for only 20 minutes after turning on the power of the
camera when the default IP address is changed
depending on the model of the camera. Refer to the
operating instructions of the camera in use for fur-
ther information.
• Thecompressionmethodoftheregisteredcamera
will be set to "JPEG" or "M-JPEG" automatically.
• Set"255.255.255.0"for"Subnetmask"oftheport
to which the camera is connected when selecting
"Register the IP address automatically given by this
unit to a detected camera".
• WhenautomaticallyassigninganIPaddress,the
gateway shall belong to the same segment of the
port selected in step 3 of the "Automatic camera
detection and registration" section on page 49.
Otherwise, IP address may not automatically be
assigned to a camera depending on the model.
• TheHTTPportnumberofthecamerawillbe"80"
automatically when the IP address of the camera is
registered. The values of the subnet mask and the
default gateway of the camera will be set to the
same values as the recorder’s.
• WhentheIPaddressofthecameraischangedby
clicking the [Execute] button, the checkboxes of
camera 1-64 that are detected on the camera
detection result window will be checked.
• ThisrecorderwillassignavailableIPaddressesto
the detected cameras by executing "Start IP
address". However, The IP address assigned to the
other devices may be assigned to the detected
cameras depending on the network environment
such as an environment using the firewall function
of Windows XP, etc. If the IP address used for the
other device is assigned to the camera, check the IP
addresses and assign an IP address to the camera
manually. When the message window saying that
there is no available IP address, check the settings
and manually register IP addresses not in use.
• "StartIPaddress"canbeexecutedonlywhen"Off"
is selected for the "DHCP" setting of the recorder.
Setup items
7 To change the IP address of the camera, enter a
new IP address to the "New IP address" field and
click the [Execute] button.
Note:
• Whenclickingthe[Execute]buttonafterenteringan
IP address to the "Start IP address" field, subse-
quent IP address not in use will be assigned auto-
matically.
8 Click the [Set] button.
Registration of the cameras will complete.
When "Register the IP address automatically given
by this unit to a detected camera" is selected on the
"Quick" page, the IP address of the detected cam-
era will be changed automatically.
Komentáře k této Příručce