Panasonic WJ-ND400 Průvodce nastavením stáhnout pdf (Strana 11)

Network settings

Network settings of the recorder

Configure the following settings for the ports to be used.

The following settings can be configured using the buttons on the front panel. Parameters will be displayed on the

LCD.

Setup items Description

DHCP Determine whether or not use a DHCP server. Select "ON" to obtain an IP address,

subnet mask and default gateway from a DHCP server.

IP address When selecting "OFF" for "DHCP", enter an IP address.

Subnet mask When selecting "OFF" for "DHCP", enter a subnet mask.

Default gateway When selecting "OFF" for "DHCP", enter a default gateway.

HTTP port Designate the HTTP port number to be used. Normally "80" is to be designated.

The default network settings of the recorder are as follows.

Setup items Camera port Client PC port Maintenance port

DHCP – OFF –

IP address 192.168.0.250 192.168.1.250 192.168.2.250

Subnet mask 255.255.255.0 255.255.255.0 255.255.255.0

Default gateway – 192.168.1.1 –

HTTP port – 80 –

Important:

 • Thenetworksettingsforeachport(IPaddress,etc.)shouldbeconfiguredwithadifferentsubnet.Otherwise,

network communication may be failed.

Note:

 • WhenthenetworksettingsofthePCareasfollows,itisunnecessarytoconfiguretheabovesettings.Itispos-

sible to configure the settings and operate the recorder using a web browser after completing the connection.

IP address: 192.168.1.2 to 249, 192.168.1.251 to 254

Subnet mask: 255.255.255.0

Default gateway: 192.168.1.1

When the settings values other than above are set, it is necessary to configure the network settings of the

recorder and the PC.

 • Thenetworksettingsofacameracanbeconfiguredonthesetupmenuofthecamera.Refertothe"NWcam-

era" section on page 49 for further information.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 109 110

Žádné komentáře

Panasonic WJ-ND400 Průvodce nastavením Strana 11